با استفاده از این ماژول ، می توانید یک دماسنج مجهز به رله قطع و وصل خروجی داشته باشید.
بطور کلی ترموستات برای تنظیم درجه حرارت مایعات، گازها و جامدات در دستگاههای گرم یا سردساز در بخشهای مختلف زیر مورد استفاده قرار می گیرد.:
ساختمان : در بخش تاسیسات اعم از شوفاژ خانه های مرکزی و کنترل دما در سیستم های هواساز، چیلر و فن کوئل و…
صنعتی : اعم از گلخانه ها،گرم خانه،دستگاه جوجه کشی، کوره،دیگ های بخار و اتوکلاوها و …
لوازم خانگی : در لباسشویی، ظرفشویی، سرخ کننده ها، سماور برقی، فرهای برقی، آبگرمکن برقی و گازی
مشخصات
دارای سنسور بیرونی ضدآب NTC 10K
رنج دمایی : 50- الی 110 درجه سانتی گراد
دقت: ± 0.1 درجه سانتی گراد
دارای یک رله خروجی 10A
ولتاژ کاری : 6 الی 30 ولت DC
ابعاد:79x44x26mm
طول سیم : 50 سانتی متر
It is a digital temperature controller module.LCD display, very clear, easy to use, powerful.It can be widely used at Smart home,Industrial control,Automatic irrigation,Indoor ventilation.Protection equipment.
Features:
1>.LCD display;
2>.Power-down memory function;
3>.Emergency stop function;
4>.Real-time display temperature;
5>.Automatically save parameters;
6>.Support UART Set;
7>.Support Heating and Cooling work mode;
8>.High temperature buzzer alarm;
9>.Work status indicator;
10>.Independent of parameters;
11>.With case, beautiful and practical;
12>.High precision;
13>.Multiple parameters are displayed simultaneously.
Parameters:
1>.Product Name:Digital Temperature Controller
2>.Product Number:XY-WT01
3>.Working Voltage:DC 6V-30V
4>.Control Load Current:10A(Max)
5>.LCD refresh rate:0.5 second
6>.Temperature Sensor:NTC-10K B3950
7>.Test temperature: -50~110℃
8>.Control precision:0.1℃
9>.Sensor length: 0.5 meter
10>.Sensor probe specifications:4*30mm Stainless steel
11>.Physical dimension:79*44*26mm
Product Introduction:
1. Heating mode 'H' :
When the detected temperature ≤ set temperature - hysteresis temperature , the relay is turned on, and the heating device starts to work;
When the detected temperature ≥ set temperature , the relay is turned off and the heating device stops working;
2. Cooling mode 'C' :
When the detection temperature ≥ set temperature + hysteresis temperature , the relay is turned on, and the refrigeration equipment starts to work;
When the detected temperature ≤ set temperature , the relay is disconnected and the refrigeration equipment stops working;
3. High temperature alarm function ALA :
When the actual temperature ≥ alarm temperature, the system turns on the sound and light alarm, and disconnects the relay, any key stops the sound and light;
4. Delayed start OPH :
When a normal heating or cooling operation is completed, the system starts timing T, and only after T ≥ OPH can the system perform the next round of heating or cooling;
5. Temperature correction function OFE (-10.0~10.0 °C ) :
If the system works for a long time, there may be deviations. Corrected by this function, the actual temperature = measured temperature + calibration value;
6. Parameter remote read / set:
The UART can be used to set parameters such as start temperature, stop temperature, and temperature correction.
7. Temperature real-time reporting:
If the temperature reporting function is enabled, the product transmits the detected temperature to the terminal through the UART at intervals of 1 s , which facilitates data acquisition;
8. Relay enabled ( default on ) :
If the relay is turned off, the relay remains off;
9. Restore factory settings:
Press STOP at the same time , SET button 3S or more, restore the factory settings;